|
Step 7
(Dissolve the annealed product)
Drop
the heat treatment vessel into a small container and add water
or add water to your heat treatment vessel if it is large enough.
Heat
the water and stir until you have dissolved any of the heat treated
gold/salt.
What
you should have now is a nice orange liquid.

Step 8
(Dry
the orange liquid)
Ok,
Same
deal as step #4
Aside
from drying out the liquid you may want to remove the salt by
washing the end product. I opted not to waste too much time on
washing, instead I saved my wash water and claimed what would fall
out over a reasonable amount of time.
My
second run at this process as described here resulted in a less
potent (or apparently less potent) product.
This
could be some slight variation in the process between batch 1 and 2,
or it could be as simple as the finer powder product in run 2
combined with the salt makes the powder sticky and less responsive
to the magnetic test.
The
best results I have documented are presented in the videos on
 |